Posts

Field Services!

Power plant owners face a major challenge of keeping aging turbines up and running efficiently and cost effectively.

Power Services Group has the experience and expertise to help solve your turbine problems.

Call your turbine experts today for more information on how to properly maintain your turbine!

PSG executes another successful Steam Turbine Major Inspection

PSG mobilized tooling, supervision, and craft labor to a paper mill located on the East Coast, USA to perform a scheduled major inspection on their GE steam turbine. The scope of work including removing the steam turbine rotor and steam path components for inspection. The steam turbine rotor and internal components were shipped off site for sand blasting, nondestructive examination (NDE), and inspection. The T-1, T-2, T-3, and T-4 bearings were all sent out for repair. The #1 inboard, #2 inboard, and #3 outboard bearing oil deflectors were sent out for refurbishment, inspections found that all three seals had excessive clearance.

Auxiliary work included: inspecting the NRV valve, 1200# MSV, 850# MSCV, all three lube oil pumps, V-1 upper, V-1 lower, and V-2 valve racks and operating cylinders, the lube oil coolers and generator coolers were shipped out for cleaning and inspections, the lube oil and EHC systems were cleaned utilizing a high velocity oil flush. The generator stator and rotor were inspected and cleaned.

The end result was a successful inspection, with zero safety incidents, and a satisfied customer.  If you would like us to quote your next steam turbine major inspection, please click here to submit your request.

Steam Turbine Inspection & Repair Services

Turn-Key Inspections

Power Services Group (PSG) has the ability to provide full turnkey inspections on steam turbine generators for most OEM manufacturers. PSG provides total turnkey outage performance including technical direction, engineering, project management & coordination, supervision, labor, tooling, repairs, parts sourcing and/or manufacturing, and start-up support. We support fossil and nuclear steam turbines ranging from 1MW to 1,300MW for all major OEMs. We service all industry types including, but not limited to: industrial, paper/pulp, marine, steel/aluminum, chemical and petrochemical, utility, nuclear, and independent power producers.

Contact Us today to learn how we can help you with your next steam turbine project.

Services Provided: Common Repair Services:
  • Open, Clean, Inspect, Close (Outage Services)
  • Valve & Bearing Inspection and Repairs
  • Steam Path Component Inspection and Repairs
  • Major Overhaul Planning and Execution
  • Shop Repair Services
  • Field Repair Services
  • Forced Outage Responsiveness
  • Multi-Year Service Agreements
  • Engineering/Consulting
  • Reverse Engineering
  • Parts Manufacturing
  • Generator Inspection, Testing, and Repair
  • Running Condition Assessments
  • Unit Installation/Relocation
  • Nozzle and Diaphragm Refurbishment
  • Blade Ring Refurbishment
  • Seal and Packing Machining and Replacement
  • NDE Services
  • Dish Removal and Re-rounding Services
  • Blade/Bucket Replacement
  • Erosion Shield Replacement
  • Lashing Lug Weld Repair
  • Tennon Welding and Refurbishment
  • Cover Replacement
  • Bore Plug Removal and Installation
  • Balancing Services
  • Valve Reconditioning
  • In-House Nitriding Services
  • Stellite Application Services

 

 

 

Steam Turbine Inspection & Repair Services

Turn-Key Inspections

Power Services Group (PSG) has the ability to provide full turnkey inspections on steam turbine generators for most OEM manufacturers. PSG provides total turnkey outage performance including technical direction, engineering, project management & coordination, supervision, labor, tooling, repairs, parts sourcing and/or manufacturing, and start-up support. We support fossil and nuclear steam turbines ranging from 1MW to 1,300MW for all major OEMs. We service all industry types including, but not limited to: industrial, paper/pulp, marine, steel/aluminum, chemical and petrochemical, utility, nuclear, and independent power producers.

Contact Us today to learn how we can help you with your next steam turbine project.

Services Provided: Common Repair Services:
  • Open, Clean, Inspect, Close (Outage Services)
  • Valve & Bearing Inspection and Repairs
  • Steam Path Component Inspection and Repairs
  • Major Overhaul Planning and Execution
  • Shop Repair Services
  • Field Repair Services
  • Forced Outage Responsiveness
  • Multi-Year Service Agreements
  • Engineering/Consulting
  • Reverse Engineering
  • Parts Manufacturing
  • Generator Inspection, Testing, and Repair
  • Running Condition Assessments
  • Unit Installation/Relocation
  • Nozzle and Diaphragm Refurbishment
  • Blade Ring Refurbishment
  • Seal and Packing Machining and Replacement
  • NDE Services
  • Dish Removal and Re-rounding Services
  • Blade/Bucket Replacement
  • Erosion Shield Replacement
  • Lashing Lug Weld Repair
  • Tennon Welding and Refurbishment
  • Cover Replacement
  • Bore Plug Removal and Installation
  • Balancing Services
  • Valve Reconditioning
  • In-House Nitriding Services
  • Stellite Application Services

 

 

 

Murray Steam Turbine Inspection & Repairs

We recently completed another Murray Steam Turbine overhaul at our Steam Path Repair facility in Pevely, Missouri.  We completely disassembled the unit, replaced damaged blades, performed minor diaphragm repairs, performed minor case repairs, balanced the rotor, and reassembled the unit for shipment.  If you have an industrial steam turbine that will need inspection and repair in the future please contact us for a free estimate.  Our qualified repair technicians perform excellent work, and you can rest easy knowing your turbine will run smoothly and efficiently throughout the next run cycle.

We offer milling services for equipment optimization, retrofits and resurfacing

 

Milling Services by Orbital Energy Services

Our equipment can accommodate a wide range of applications. Some examples:

  • Flat bearing surfaces
  • Pump or generator bases and bedplates
  • Pockets and penetrations in structures
  • Inspection openings and hatch covers
  • Internal and external shaft keyways

Why should we be your first choice for On-Site Milling?

Reduced Cost and Downtime

Performed on-site, we have eliminated the issues related to removing and shipping your equipment to a shop:  exorbitant shipping costs, potential damage during shipment, valuable lay down space, and plant crane and rigging requirements.

Convenience

All work is performed at the customer’s facility, regardless of size, position, damage, material, etc.  Once on-site, unloading and loading of our equipment is quick and is typically accomplished with a small fork lift or crane.

Flexibility

Our milling equipment can accommodate almost any application in almost any location and environment.

CONTACT US today to learn more about our milling capabilities and how we can help you achieve your goals.

Steam Turbine Inspection & Repair Services

Turn-Key Inspections

Power Services Group (PSG) has the ability to provide full turnkey inspections on steam turbine generators for most OEM manufacturers. PSG provides total turnkey outage performance including technical direction, engineering, project management & coordination, supervision, labor, tooling, repairs, parts sourcing and/or manufacturing, and start-up support. We support fossil and nuclear steam turbines ranging from 1MW to 1,300MW for all major OEMs. We service all industry types including, but not limited to: industrial, paper/pulp, marine, steel/aluminum, chemical and petrochemical, utility, nuclear, and independent power producers.

Services Provided: Common Repair Services:
  • Open, Clean, Inspect, Close (Outage Services)
  • Valve & Bearing Inspection and Repairs
  • Steam Path Component Inspection and Repairs
  • Major Overhaul Planning and Execution
  • Shop Repair Services
  • Field Repair Services
  • Forced Outage Responsiveness
  • Multi-Year Service Agreements
  • Engineering/Consulting
  • Reverse Engineering
  • Parts Manufacturing
  • Generator Inspection, Testing, and Repair
  • Running Condition Assessments
  • Unit Installation/Relocation
  • Nozzle and Diaphragm Refurbishment
  • Blade Ring Refurbishment
  • Seal and Packing Machining and Replacement
  • NDE Services
  • Dish Removal and Re-rounding Services
  • Blade/Bucket Replacement
  • Erosion Shield Replacement
  • Lashing Lug Weld Repair
  • Tennon Welding and Refurbishment
  • Cover Replacement
  • Bore Plug Removal and Installation
  • Balancing Services
  • Valve Reconditioning
  • In-House Nitriding Services
  • Stellite Application Services

 

 

 

Steam Turbine Inspection & Repair

Power Services Group (PSG) has the ability to provide full turnkey inspections on steam turbine generators for most OEM manufacturers. PSG provides total turnkey outage performance including technical direction, engineering, project management & coordination, supervision, labor, tooling, repairs, parts sourcing and/or manufacturing, and start-up support. We support fossil and nuclear steam turbines ranging from 1MW to 1,300MW for all major OEMs. We service all industry types including, but not limited to: industrial, paper/pulp, marine, steel/aluminum, chemical and petrochemical, utility, nuclear, and independent power producers.

Steam Turbine Maintenance

Power Services Group supports fossil and nuclear steam turbines ranging from 1MW to 1,300MW for all major OEMs.

Our steam turbine services include:

Field Services Overhaul
Inspection Outage management
Maintenance Relocation
Installation Component repair solutions
Rotor blade weld repair Nozzle & diaphragm repair
Valve repair and upgrade Valve component manufacturing

Our flexible and cost-effective steam turbine solutions can help operators reduce equipment downtime and extend the life of steam turbine components.  CONTACT US today to discuss your next steam turbine inspection.

D-11 Steam Turbine Major Inspections

The D-11 Steam Turbine is at a point in its life cycle where many Major Inspections are taking place. These units require careful attention to detail upon disassembly and reassembly of the machine, ensuring accurate clearances and proper alignment. The D-11 steam path components have many known issues for which we have developed cost effective and reliable repairs. The valve components require careful examination to ensure proper functionality between inspections. Please contact us today to discuss how we can help you plan and manage your upcoming D-11 turbine inspection.