This author has yet to write their bio.Meanwhile lets just say that we are proud Mike.Lake contributed a whooping 473 entries.
We’ve completed the month of May with zero OSHA-recordable injuries and have a TRIR of 0.00 for the year. We continue to be proactive in identifying potential hazards and maintaining our safety-first mindset. Great job by our HSE Director, Shannon Scruggs, our Repair Facility Management and Technicians, and each one of our Field Service Project […]
Pre-Outage Planning A Customized Plan Most power producers are short-staffed and do not have the time and sometimes the expertise to prepare a comprehensive outage plan and workscope. That’s why we offer the option of providing our comprehensive Pre-Outage Planning Service independent of the award of the contract for inspection and repairs. Our field project […]
We would like to welcome Eric Dahl to the PSG team! Eric has joined our team as a Senior Turbine Repair Engineer and will be based at our Pevely, Missouri Steam Turbine Repair Facility. Eric has accumulated 30+ years of work experience in the Turbine Industry, including the past 7 years with GE Oil & […]
We recently completed another Murray Steam Turbine overhaul at our Steam Path Repair facility in Pevely, Missouri. We completely disassembled the unit, replaced damaged blades, performed minor diaphragm repairs, performed minor case repairs, balanced the rotor, and reassembled the unit for shipment. If you have an industrial steam turbine that will need inspection and repair […]
We recently completed a Major Inspection on a Westinghouse Steam Turbine and Hydrogen-cooled Generator for a Utility in the Southeast U.S. The project consisted of inspecting the HP/IP Turbine, LP Turbine, and Valves. The steam path components were blast cleaned and inspected, with minor blade repairs performed on-site. The turbine rotors had boresonic inspections performed, […]
We recently completed another “A” Inspection on an Alstom STF Steam Turbine. This inspection consisted of inspecting the valves, bearings, H2 seals, testing of the generator, an LP crawl through, as well as an HP/IP borescope. Below is a photo of the T1 Bearing Assembly, in which the bearing was dimensionally inspected and clearances verified […]
Our Field Machining Division recently completed another successful shaft machining project. The project included initial machining, sleeving of the shaft, and final machining to bring the shaft back to OEM specifications. The end result was another satisfied customer whose equipment was back up and running as designed. Great job team! Contact Us today if you […]
We have more steam turbine diaphragms coming through the shop! It has been a busy turbine outage season and the diaphragms continue to roll through our Steam Path Repair facility in Pevely, Missouri. Please contact us if you have any diaphragms that may be in need of inspection and/or repair during your next turbine outage. […]
We recently finished a Collector Ring Machining project for a power generating unit on the East Coast. As outages get closer to finishing we see an influx of Collector Ring and Journal Machining requests come in. If you have any Collector Ring Machining needs please contact us today! For our latest Collector Ring Machining brochure, […]
Power Services Group brings you a wide range of services specific to industries like yours, offering exceptional value and responsiveness. We can hit the ground running and deliver results so you can have peace of mind and your equipment is always available.
125 SW 3rd Place, Suite 300
Cape Coral, FL 33991
Phone: (800) 226-7557