Entries by Mike.Lake

Steam Turbine Inspection & Repair Services

Turn-Key Inspections Power Services Group (PSG) has the ability to provide full turnkey inspections on steam turbine generators for most OEM manufacturers. PSG provides total turnkey outage performance including technical direction, engineering, project management & coordination, supervision, labor, tooling, repairs, parts sourcing and/or manufacturing, and start-up support. We support fossil and nuclear steam turbines ranging […]

May Safety Update

We’ve completed the month of May with zero OSHA-recordable injuries and have a TRIR of 0.00 for the year. We continue to be proactive in identifying potential hazards and maintaining our safety-first mindset. Great job by our HSE Director, Shannon Scruggs, our Repair Facility Management and Technicians, and each one of our Field Service Project […]

Outage Planning Services

Pre-Outage Planning A Customized Plan Most power producers are short-staffed and do not have the time and sometimes the expertise to prepare a comprehensive outage plan and workscope.  That’s why we offer the option of providing our comprehensive Pre-Outage Planning Service independent of the award of the contract for inspection and repairs. Our field project […]

Welcome to the team Eric Dahl!

We would like to welcome Eric Dahl to the PSG team! Eric has joined our team as a Senior Turbine Repair Engineer and will be based at our Pevely, Missouri Steam Turbine Repair Facility.  Eric has accumulated 30+ years of work experience in the Turbine Industry, including the past 7 years with GE Oil & […]

Murray Steam Turbine Inspection & Repairs

We recently completed another Murray Steam Turbine overhaul at our Steam Path Repair facility in Pevely, Missouri.  We completely disassembled the unit, replaced damaged blades, performed minor diaphragm repairs, performed minor case repairs, balanced the rotor, and reassembled the unit for shipment.  If you have an industrial steam turbine that will need inspection and repair […]

Westinghouse Utility Steam Turbine Major Inspection

We recently completed a Major Inspection on a Westinghouse Steam Turbine and Hydrogen-cooled Generator for a Utility in the Southeast U.S.  The project consisted of inspecting the HP/IP Turbine, LP Turbine, and Valves.  The steam path components were blast cleaned and inspected, with minor blade repairs performed on-site.  The turbine rotors had boresonic inspections performed, […]

Alstom STF Steam Turbine “A” Inspection

We recently completed another “A” Inspection on an Alstom STF Steam Turbine.   This inspection consisted of inspecting the valves, bearings, H2 seals, testing of the generator, an LP crawl through, as well as an HP/IP borescope.  Below is a photo of the T1 Bearing Assembly, in which the bearing was dimensionally inspected and clearances verified […]

Shaft Machining

Our Field Machining Division recently completed another successful shaft machining project.  The project included initial machining, sleeving of the shaft, and final machining to bring the shaft back to OEM specifications.  The end result was another satisfied customer whose equipment was back up and running as designed.  Great job team! Contact Us today if you […]